Description
The crane safety remote control can not only basically control the basic actions of the crane such as lifting, front and back, left and right, but also realize other complex functions of the crane. For example, parameters such as lifting speed and turning speed of the crane can be adjusted to achieve more precise control. At the same time, the alarm function of the crane can also be realized through the button on the remote control, so as to issue a warning in time in case of emergency.
Working Condition
1. The remote control battery must be installed correctly as instructed.
2. Start the remote control and press the green button first, the LED light flashes green, and then operate the driving action according to the instructions.
3. Press the red key after use, turn off the transmitter, and unplug the key switch.
4. Wrong operation LED light lights up red, prompting to follow the correct steps. When the battery is low, the red light flashes to prompt the replacement of the battery
5. Do not press the operation key continuously and frequently, which may burn out the contactor contact and cause driving failure
Features
FEATURE 1
Low power consumption.
FEATURE 2
The operation function can be set by N-23 software
FEATURE 3
The working distance can be up to 100 meters
FEATURE 4
Built-in antennas for transmitter and receiver (receiver can be retrofitted: passive antenna)
Technical Data
| F24-8D emitter parameter | |
| Shell | Glass Fiber Reinforced Nylon |
| Frequency range | VHF:310-331MHz, UHF:425-446MHz |
| Protection grade | IP65 |
| Transmitted power | <10dBm |
| Emitter power supply | 2AA |
| Safety code | 32 bit |
| Temperature | Normal |
| Control distance | 100 meters |
| Warranty | 12 months |
| Size | 245*52*53 mm |
| F24-8D receiver parameter | |
| Shell | Glass Fiber Reinforced Nylon |
| Frequency range | VHF:310-331MHz, UHF:425-446MHz |
| Protection grade | IP65 |
| Receiver sensitivity | <110dBm |
| Receiver power supply | 24V/36V/48V/220V/380V |
| Safety code | 32 bit |
| Temperature | Normal |
| Out contector capacity | 8A sealed relay out (with AC 250V/10A relays, 10A fuse) |
| Cable length | 1.3m (Other length can be customized) |
| Size | 295*160*101 mm |
